Safety Tips When Using A Rental Car

Driving a rental car is not that much different from using the one that you own. The only difference is that you may not be familiar with how it drives. Additionally, the size of the car, your blind spot, and other aspects of driving may cause you to not be as adept. When this occurs, there is always the potential for accidents. To avoid any of this, you need to use certain safety tips to improve your chances of not having an accident while driving. Let’s look at what these tips are, and how you can benefit from implementing them the next time you rent a car. These tips were provided by company who has been in business for about 15 years!
  • Common Problems With Car Rentals
Some of the problems that people experience with car rentals have to do with unfamiliarity. For example, if they are driving an automatic in the United States, but then they are driving a stick shift in Europe, they might have a few problems. They could grind the clutch, or burn out the motor, all because they don’t know what they are doing. Therefore, the first safety tip is to rent a vehicle that is similar to your own. This can help you avoid common problems with car rentals which include minor accidents, burning out the transmission and a host of other potentially expensive problems.
  • How Should You Drive Your Rental Car?
Driving a rental car should be done with great care. It is recommended that you go slowly until you are used to the way that it moves. The steering wheel, as well as your position in the seat, can adversely affect the way that you drive. In addition to this, the size of the vehicle may make it difficult to steer it properly. This is true if it is a much larger or smaller car. By going slowly at first, you will have no problem at all learning to drive your rental car safely.
  • How To Prevent Accidents From Occurring
The best way to prevent having an accident when you are driving is to not go excessively fast. Many people rent a sports car, for example, and try to see how fast it will go. By driving as you normally would, and using care, you will likely avoid any accidents. If you are driving, try to avoid the freeways. Try to use highways and low traffic areas instead. Most of the accidents that occur happen during rush hour. By traveling early in the morning, and in the late evening, you should have no problem avoiding potential car accidents. Using these safety tips when renting and driving a rental car will make this very easy to avoid accidents. You may never be worried about driving a rental again. Simply drive slowly and only rent vehicles that you are familiar with. Using these simple tips, you will avoid costly mistakes that can be expensive when using a rental car. If you do have to rent a car you are not familiar with, simply drive with extreme caution, and you will do just fine.
Read the rest

Kelowna Auto Mechanic Car and Truck Tips

If your car engine makes these 5 noises, Call Kelowna Auto Mechanic

Cars make noise all the time. In, fact, there is some level of fear when you sense that your ride is too quiet. Some are normal noises while others indicate serious problems. Of all the noises, those coming from the engine are the most dreaded. Why? Engine repairs are not cheap and could eat into your years of savings in a blink of an eye. Therefore, you are not paranoid when you drive straight to your Kelowna auto mechanic the moment you hear any weird noise from your engine.

To help you know the kind of engine noises that you should deal with immediately, this post presents to you 5 of the most notorious;

Grinding noise

There are two occasions when you can hear your engine grind. When you start your car and the first reaction you get is grinding, it points an issue with the starter motor. It needs a replacement and the noise will be gone for good.

However, it should worry when you hear the grinding noise accompanies gear shifting. The transmission is the culprit. If you are lucky, some repairs will solve the problem but you may have to foot a transmission replacement bill.

Engine squealing

Squealing or chirping engine noise is a nuisance you cannot put up with. It happens every time you hit the car’s accelerator and points out to a collection of problems. If your vehicle is old, the accessory belts are at the center of this. They are either worn out or loose thus you should have them replaced or adjusted to acceptable tautness. New cars are not spared from this kind of noise. In their case, it is most probably a problem with the serpentine belt. This belt is packed up with multiple accessories that make sure of a smooth engine operation. There are no two ways about it, you need to have the problem checked and fixed right away.

Knocking sound

This is a common sound from engines. And while you may dismiss it as not serious, you should rethink that. It is telling you that there is something wrong with the combustion streams. This can lead to the engine’s overheating and a lot of other things can go wrong. What you need right now is a thorough check of the cooling system and immediate remedy from a trusted auto expert.

Popping sounds

The last time you heard your exhaust popping it did not go well, right? It will not go well this time round too. One probability is that there is a leak and the fuel injector is the black cat in this problem. It could as well be a problem with the muffler holes. Enough with the guesses; go to an auto expert near you and get an accurate diagnosis.

Rattles and rumbles

Most of the times, rattling and rumbling do not come from the engine. They are associated with the exhaust system. It could be a hole or loose hoses within the exhaust matrix. Tightening and replacements will put these noises to bed.

Rattles and rumbles from the engine happen when you stop at traffic lights. They point to a deep-seated problem with the catalytic converter. You can only solve this with a replacement.

Guest Post by

Read the rest

Leveling kits versus lift kits: What’s the difference?

White Rock suspension

Whether it is for form or function, lifting a truck is often an important event in the life of any owners. Just as a Ferrari which is believed to be low, a truck is often considered to be high.

So you’ve made a decision to lift your truck and start to do some basic research. During this process, your head might be spinning due to all the possible choices: lift kits, air suspension, load levelers, and leveling kits. What are the differences between them? Let’s take a look at 2 of the most popular choices available these days, whether just to give a meaner stance or for serious off-roading: leveling versus lift kits.

Lift kits

A lift kit helps raise your entire vehicle, rear and front, from a subtle 1-inch to an adequate height that you want to duck under the overpasses. White Rock Grip Tire Truck lift kits often come in 2 types: body and suspension lift kits.
A body lift uses spacers and blocks to lift a truck’s body higher to the frame without changing anything of the suspension geometry. By using a body lift kit, you can run larger tires and wheels, while still keeping the ground clearance remain unchanged. However, stability might be negatively affected because of the raised ride height.

Compared to a body lift, the installation might be more complicated and expense might be also higher with a suspension lift. However, the result is undoubtedly worth it. Basically, suspension lifts involve changing everything from the leaf springs and struts/shocks to the trailing arms, control arms, and even the steering and driveshaft parts. Upgrading and replacing these components will allow for more ground clearance, suspension articulation, the ability to use larger tires for your trucks.

Leveling kits

As the name implies, a leveling kit helps level a truck by raising up the front end up a couple of inches as needed. As a result, you can remove the rake in your truck after the factory and bring the rear and front level. This task is mainly primarily performed for the look, but it might also improve the ground clearance in the truck’s front and allow you to run with larger tires.

Another advantage of leveling vehicles is that since they just raise the front part rather than lowering their rear, the payload capacity still remains unchanged. This means you can still place just as much weight at the bed without worry if the suspension bottoms out.

Leveling kits often come with a very simple design, which utilizes coil spacers, torsion keys or strut extensions (depending on your vehicle’s suspension), and some can be set up without needing to jack up your truck. If you just want an aggressive look and stance from your vehicle instead of turning the rig into an off-road model, a leveling kit should be a perfect option.

Final thoughts

With a good lift kit, your truck air conditioning can be truly transformed into an off-road monster you have always wanted, but there are many important factors to take into consideration before making the final decision. Be sure to have clear objectives and know what you are getting into before going for a particular type of lift kit.
Read the rest